How to Install a Swing Door

A swing door differs from other doors in that it’s pivoted on double hinges enabling it to open both ways, thus accessible in both directions. They are highly functional making them ideal for commercial spaces, and also create a beautiful main entrance or dual sash connecting the indoors and outdoors.  Swing doors can also be used as room dividers, for example, in place of a wall creating not only a dramatic feel but also add an airy effect. They can be used for main entrance, patio, deck or balcony and even living room and study entrance. According to concept product in Australia, a swing door is an excellent choice as they are affordable, user-friendly and maximize flow of traffic through your space creating privacy, environmental health and a safety barrier as well. Apparently swing doors are not hard to install although having a helper makes the project easier. Here are steps on how to install swing doors Perth shops have to offer for you to try at home as a DIY project.

Swing doors PerthStep 1. The Right Doorway

It’s important to find the right doorway to install swing doors in Perth. The location should be where it will not damage anything or hurt anyone while being opened in either direction. Also make sure it will be able to fit snugly for safety measures. After deciding on the right doorway, take the necessary measurements and markings to be used later.

Step 2. Buy a Swing Door

If you are not experienced in buying swing doors Perth market has today, you can ask a Perth swing doors expert for advice in finding one other than trying to make one yourself. Shopping around before for a variety will ultimately land you an affordable price as you will be able to make comparisons. After the purchase, complete any adjustments before handling the door. Painting or staining is best done before so that it gets time to dry as you continue with the rest of the work.

Step 3. Drilling the Holes

These holes are used for the hinge screws. First, the door’s weight is measured to determine the number of hinges required to hold it up. A heavy door requires more hinges compared to a light door. After deciding on the number of hinges to use, space them appropriately. Mark the areas where the hinges are going, then lay them over the top of the area and mark position of the screw holes.

Step 4. Secure the Hinges and Hang

Using an electric or manual screwdriver depending on your type of hinge and screws, secure the hinges using the holes that you drilled making sure they are not too tight or too loose and then hang the door. It’s easier to have a partner at this point to help you hold the door and set the hinges and secure it to the frame. Lastly, inspect the door for any touch ups. Check out at concept products.

With the above steps, you can easily install your swing doors Perth shops currently offer. If it’s complicated, then just buy swing doors in Perth and hire a professional to install them for you.

Leave a Reply

Your email address will not be published. Required fields are marked *